Category Archive ความรู้กล้องวงจรปิด

What to consider when selecting a multisensor camera

Multisensor cameras boast various advantages, among them coverage of wide areas with fewer devices and reduced installation and maintenance cost. But as with all other IT or electronic devices, there are various things to consider when selecting a multisensor camera. At the same time, there are certain installation tips that the user/installer may find helpful.

Basically, choosing a multisensor camera requires an understanding of the user’s own needs and requirement. The following are some of the factors that the user should look at when choosing the device that best suits them.

Fixed vs. multidirectional

Multisensor cameras come with either fixed or adjustable lenses. For the former, cameras allow 180-, 270- and 360-degree field of view. “Users should pick a camera with the FOV that best matches their use case. For example an open square or parking lot can benefit the most from a 360 degree, and a long street will only require 180 degrees,” said Saleh Makarb, Product Marketing Manager at Dahua Technology.

A multisensor camera with adjustable lenses, meanwhile, allow the user to see several directions at once. “An adjustable multi-directional camera provides more flexibility in situations where you don’t require a continuous view, but would rather use the camera to look at specific areas. In this case, each camera can be adjusted independently. One camera can face the doorway, while the other cameras are used to view specific areas of a large room,” said Bob Mesnik, President of Kintronics.

Compression

If the area to be surveilled has a lot of movements, then choosing a camera with good compression would be a good way to save bandwidth and storage space. “When combining smart coding and H.265 compression, we are able to deliver a lower bit rate from the four 4K cameras than a standard 4K camera at H.264. The four repositionable lenses can reduce blind spots and monitor a variety of intersection shapes in city centers,” said Karen Sangha, Field Marketing Manager at Panasonic.

“The compression technology is important for users,” said Shengfu Cheng, Director of Marketing and Product Development Division at VIVOTEK. “Our MS9390-HV can save on storage and bandwidth by up to 90 percent by adopting H.265 and VIVOTEK self-developed Smart Stream III technology compared to H.264.”

Weather-/Vandal-proof

For outdoor applications, the camera should be resistant to harsh weather and vandalism. “An IP66 rating (or higher) is ideal for cameras installed outdoors that can be subject to extreme weather conditions,” said Jeff Whitney, VP of Marketing at Arecont Vision.

Sangha of Panasonic, meanwhile, mentions their ClearSight Coating technology. “It’s unique to Panasonic and aims to repel water drops to enable the camera to capture clear images even when it is raining. The ClearSight coating is also effective at repelling dirt, which reduces the frequency of cleaning the dome cover. This makes them particularly suitable for capturing evidential grade images even under challenging of conditions, such as use in city surveillance,” she said.

WDR/lowlight

Also in outside applications, it would be ideal if the multisensor camera has good WDR and lowlight performance to address various lighting conditions. “Multi-sensor cameras are still security cameras that need to extract information from scenes with challenging lighting conditions. So, you should look for adequate resolution for the detail you need, good enough low light and wide dynamic range performance and for cameras that can adapt to these changing conditions dynamically,” said Kevin Saldanha, Principal Product Manager for Imaging at Pelco by Schneider Electric.

“If the area to be captured has simultaneously shaded and bright light conditions, wide dynamic range at 120dB usually provides the best visual balance. If the end user demands clear color images in an area with poorly-lit conditions, it would be prudent to find a model with LED illumination built into each gimbal of the multi-sensor camera,” Whitney said.

Installation tips

Generally speaking, with one cable and one IP address, a multisensor camera is easy to install – a draw that attracts users in the first place. But there are still installation tips that installers and users can find helpful.

“Panoramic multi-sensor cameras are best mounted higher than 3 meters and at least 3 meters away from moving objects in the scene to capture wide field of view. Multi-directional cameras need to be mounted in locations from which you can cover the targeted areas of interest,” Saldanha said.

“The correct tilt and positioning of both multi-sensor and multi-adjustable cameras are critical to get the maximum coverage of an area – for example, not placing the camera right next to a wall since the lateral views will be completely covered,” Cheng said.

Again, a full understanding of what the customer’s needs are is an important prerequisite. “We usually start with the requirements and expectations of the customer before we suggest installation locations. It is important to understand what the customer expects to see. Sometimes there are unreasonable expectations. For example, these cameras are not the best for identifying a license plate that is 10 meters away,” Mesnik said.

Source: William Pao, a&s International Date: 2018/07/24

A global overview on senior home care technology

With the number of senior citizens increasing and a lot of them opting to live at home rather than in a nursing facility, how to care for them in a home setting has become a top priority for governments and care providers. In this regard, technology can help, and many countries in the world have already adopted related products and solutions.

Needless to say, aging has become a phenomenon across the globe. According to figures by the United Nations, the number of older persons — those aged 60 years or over — is expected to more than double by 2050 and to more than triple by 2100, rising from 962 million globally in 2017 to 2.1 billion in 2050 and 3.1 billion in 2100. The study also suggests globally, population aged 60 or over is growing faster than all younger age groups.

Amid this trend, providing care for seniors so that they can live with independence and dignity has become a top agenda for both public and private sector players. More and more, nursing homes and assisted living facilities have sprung up to accommodate the elderly, providing care for them.

Despite this, there are still senior citizens who opt to stay at homes due to the comfort and convenience factors. And thanks to technology, seniors can be better taken care of in their homes via telehealth or remote monitoring solutions with which healthcare professionals can monitor individuals’ vital signs and provide immediate assistance should something happen.

Meanwhile, various smart home technologies can help make home living easier for seniors. Voice assistants can provide information and even serve as agents that keep senior citizens company so they don’t feel lonely or isolated.

What some countries are doing

In fact, these technologies are already seen in several countries around the globe. The following are some examples.

Germany

According to a post by the European Commission, a EU-funded Smart Service Power project has developed an internet of things (IoT) platform – mainly accessible via natural language assistance software – for use with internet-connected sensor technologies to help the elderly live independently at home for as long as possible. The platform is now being trialed in the German cities of Dortmund, Duisburg and Arnsberg.

“The platform can remotely monitor a person’s condition in real time, predict any deterioration in their health, detect a medical emergency, and alert healthcare emergency services if help is needed,” the post said. “The technology assures users that medical help will be provided when they need it.”

Sweden

According to an article by the US News and World Report, Nordic countries, including Sweden, are quite advanced in this regard. Among the technologies deployed in Swedish homes cited by the article are: smart health care systems that can track seniors’ food intake, sleep patterns, heart rates and other daily habits; and smart medicine dispensers that can track medicine intake, compare data with a symptom log and improve compliance.

Japan

Japan, being an aging society, is home to some of the most advanced technologies that help with seniors living at home. According to a post by Web Japan, “monitoring support robots” using communication and IoT technologies are set up in several locations in the senior citizen’s house and measure motion, temperature, humidity and light levels via built-in sensors. Also according to the post, sensors attached to household appliances collect data that give a pattern of daily activity for the senior citizen; family members receive an alert via email if there are any abnormalities such as a vacuum cleaner that is switched on for several hours.

 

Source: William Pao, a&s International Date: 2019/03/26

 

OPTEX dual tech x-5 Sensors cleared for take-off in Germany

OPTEX has welcomed a change in regulation that will enable its indoor and outdoor dual-technology (dual-tech) X-5 Sensor range to be distributed and installed in Germany.

Dual-technologies (dual-tech) security detectors provide a combination of passive infrared and Microwave technologies to improve performance and reduce the likelihood of unwanted alarms in more challenging environments (e.g in very strong sun light, or sites likely to attract wildlife). Until recently, X-5 dual-tech intrusion detection sensors – which has a microwave emission power of 10.525GHz – could not be used in Germany. This has now changed with an amendment to the regulations announced through the Bundesnetzagentur and published in a formal document, 87/2018.

“This is fantastic news for our distributors and installers throughout Germany,” says Thomas Napora, Head of Business Development/Sales for the DACH Region, “the amendment to the radio frequency opens up the German intrusion market to a much bigger choice of sensors. German installers can now benefit from the outstanding performance given by our dual-tech Grade 2 and 3 indoor sensors and our 90- and 180-degree dual-tech outdoor sensors.”

Germany is now one of a group of European countries using the X-5 frequency: Belgium, Denmark, Greece, Italy, Luxembourg, The Netherlands, Spain, Sweden, Iceland, Norway, Switzerland.

Source: Optex Date: 2019/03/22

New CodeGUARD 5 from UNION meets latest BS 8607 grade 5 standards

UNION has launched CodeGUARD 5, the first access control device available to meet the new BS 8607 grade 5 standards.

The recently introduced grade 5 standards provide the most stringent level of security and access control for mechanical push button locks to date. Providing an extremely strong level of attack resistance, grade 5 was introduced because of the need for a high-security push button lock, and UNION is the first manufacturer to answer this need.

Grade 4 – previously the highest level – could only meet the required standard with the help of an additional integral locking unit. In contrast, a grade 5 device such as CodeGUARD 5 delivers a ‘one-stop’ security and access control solution, where the latch and lock are integrated and tested together. As a result, CodeGUARD 5 offers users an automatic deadlocking unit, whereas a grade 4 product is reliant on key holders to lock a door.

Featuring BSI Kitemark certification, CodeGUARD 5 provides access control and security in a single package, delivering assured protection for securing people, assets and data, while offering the convenience of access control without the need for wiring.

One of CodeGUARD 5’s key features is its 20mm deadlocking latch. This means it will not succumb to the kind of physical attacks that mechanical push button locks typically undergo, such as a crowbar being placed between a frame and lock to force a door open.

Furthermore, the mechanical push button lock system is secured through more than 2,000 code combinations. Unlike its competitors, the unit is also always supplied to customers with a passcode different to the standard factory settings, for optimal security.

Providing extremely high corrosion resistance, the new CodeGUARD 5 solution is also ideal for perimeter security applications. The system has undergone a salt spray test for 240 hours to demonstrate its capabilities in highly corrosive environments, with its aesthetics and performance unaffected over time.

Suitable for 30- and 60-minute timber fire doors, and 240-minute metal fire doors, CodeGUARD 5 is offered with universal handing and fixings, so the system is easy to order and specify too. This is all backed by a three-year guarantee, offering the kind of high-quality product assurance that customers have come to expect from UNION.

Karen Hubbard, Product Manager at UNION, said: “Whatever the application, CodeGUARD 5 delivers unmatched strength and durability. Building on our reputation and heritage, which dates back to 1840, CodeGUARD 5 is the toughest push button lock available, meeting the latest grade 5 standards for BS 8607.

“The solution brings together security and access control as has never been seen before – protecting people and assets even under determined and prolonged attack. CodeGUARD 5 comes with more than 2,000 code combinations, offering a huge advantage over many competitor products where pre-set factory codes have been a real weakness in the past.

“This is all complemented with a smart and stylish finish, with CodeGUARD 5 featuring an ergonomically-designed handle that would suit any modern environment.

“There is no other mechanical push button lock available that comes close in terms of strength and robustness. As such, CodeGUARD 5 is ready to set a new benchmark for mechanical access control.”

 

Source: ASSA ABLOY

Exploring some major smart city projects in the APAC region

Governments across the Asia Pacificregion are keen to implement smart city projects. Here is a look at some major initiatives from the perspective of Arup planning consultant, Brice Richard.

The Asia Pacific region is home to some of the world’s fastest growing cities. Four among them that have seen significant investments in smart city projects are Singapore, Hong Kong, Sydney, and Melbourne. According to Brice Richard, Digital Leader at Arup Singapore, the consultant that worked in the development of these cities, the key focus areas differed based on their requirements.

“We’ve worked with the Singapore Housing Development Board (HDB) in defining their smart city and smart public housing strategy,” Brice said.

“In Singapore, public housing is extremely important, with more than 80 percent of the population living in them. The authorities wanted to understand how technology could make public housing across the city more efficient, more livable, more vibrant.”

In Hong Kong, Arup led the Smart City Kowloon East feasibility study to transform a decommissioned airport and old industrial area into Hong Kong’s new Central Business District. In Sydney and Melbourne, the focus of some of Arup’s projects was in developing places of innovation and collaboration that would attract and empower knowledge-intensive industries, start-ups and entrepreneurs.

 

Identifying the focus areas

Brice Richard, Digital Leader, Arup Signapore

Brice Richard, Digital Leader,Arup Signapore Zeroing in on a focus area is critical to smart city projects. This is  either done by the city authorities before bringing in a consultant or decided after discussions with them. Talking about Arup’s experience, Brice said that for several of their projects, the consultancy was brought in at an early stage of the planning and this led to them involving more in the identification process. Hong Kong, notably, was a case where Arup was involved both at the visioning stage, and later on in the implementation steps.

“Often, the client already has an idea of what they want their ‘Smart City focus’ to be,” Brice said. “For example, in the case of Singapore’s HDB, our client already had a framework in place, and were looking for ways to improve and extend it. However, even in cases where our client knows what they want, there could be opportunities to refine their strategy, and help them prioritize. For example, our Hong Kong team jointly identified priorities for the district based on which series of pilots were selected for testing an implementation, from smart crowd management to wayfinding and smart public lighting.”
Solutions proposed and implemented
Usually, when it comes to smart city development, end users focus excessively on technology, and often get distracted by fancy gadgets, like virtual reality or drones. However, many forget that being ‘smart’ is not necessarily implementing complex technology. It also involves sound architecture and design, urban and transport planning, sustainability strategies, just to name a few.

It is the combination of all these disciplines working together toward the realization of a “Smart Vision” that makes a city, a district or a building really smart. For example, in one of its projects, Arup proposed 48 smart solutions that could potentially be implemented on the ground. However, they collaborated closely with the architects and landscape designers to ensure that these technologies were resonating with and enhancing the architectural vision of the place.

“For instance, in one of our districts in Singapore, the client was very interested in autonomous vehicles,” Brice said. “There is an element of technology in autonomous vehicles, in the vehicle itself, in customers accessing it and developing parking spaces for it. But there are also a lot of questions that are not related to technology. These include factors like architecture and infrastructure. For instance, if an automated vehicle is going around picking up people, the infrastructure needs to be built to accommodate them, and the space must be planned in a way that accommodates this very new way of moving, parking, picking people up.”
The complexity of implementation
Planning solutions based on the requirements is only half the work done. Their implementation is perhaps the most difficult part of it all. One of the reasons for this is that even when a technology may be robust, its efficient functioning is decided by several factors surrounding it. These factors often involve the integration of new technology with old technology; the cost-benefit analysis of new technology, which is often not entirely clear; and the changes in people’s skills and processes that must accompany the installation of new technology.

“Let’s say you have a technology that detects people coming into a building, and adjusts the temperature inside depending on the need,” Brice said. “Ideally, this will optimize the temperature based on the requirements. However, quite often, the HVAC systems that are already in place in the building are old and cannot be integrated with new solutions. This compatibility problems with legacy systems is a common issue.”

Another common challenge is the lack of skilled personnel. For instance, buildings will have numerous sensors installed that will collect data.
However, this is of no use if the real estate developer does not have employees who know how to make use of this data. “It is quite common to see complex BMS being implemented, but only 10 percent of its functionalities actually being used because the level of data literacy needed to act upon complex statistics is not present in the company.”
Source: Prasanth Aby Thomas, Consultant Editor Date: 2019/03/13 Related tags: smart cities, Singapore, Arup, APAC

What’s needed to secure critical infrastructure?

What’s needed to secure critical infrastructure?

Needless to say, critical infrastructure facilities such as power plants and airports play a vital role in the society. Protecting them against various threats, then, becomes important. In this regard, an integrated solution that combines different security systems can be of help.

That’s according to a whitepaper by Syneictics.

The paper spells out the importance of protecting critical infrastructure. “Natural disasters, criminal activity and increasingly hostile attacks designed specifically to cause disruption all have the potential to significantly damage the critical infrastructure that a country or continent depends upon,” it said. “Making sure the right safeguards are in place to protect individual assets is vitally important and requires the right systems and tools to facilitate collaboration with public bodies.”

According to the paper, traditionally the security systems used to protect critical infrastructure are managed separately. But to combat or prevent threats that are increasingly complicated, security needs to upgrade as well. This is where the user can benefit from a surveillance command and control platform that integrates with different systems, including but not exclusive of cameras, access control, intruder detection, public help points, building management systems, microwave sensors and others, the paper said.

Intelligent integration

With added intelligence, the user can gain even greater situational awareness. “Intelligent integration takes this concept to the next level and involves utilizing command and control software to not only collate the data, but analyze it as well,” it said. “Incidents, anomalies, or meter reading deviations from any number of subsystems and from multiple geographical locations can be identified and cross-referenced against set parameters.”

The paper then listed some examples where this intelligent integration can be applied:

Power distribution network

According to the paper, theft can leave power distribution networks compromised. “Video, audio, PIR activations, and other alarm inputs from analog and IP cameras located at different (often remote and/or unmanned) substations/operation rooms are streamed directly to a central security management center to protect against potential breaches. By alerting operators to incidents in real time, site safety protocols are implemented more efficiently, thereby protecting both employees and the general public,” it said.

Water treatment plant

Water treatment plants are critical, and contamination can endanger the whole society. “Any abnormality picked up by the intruder detection and access control systems immediately alerts security teams by streaming live footage from cameras nearest the triggered alert zone,” the paper said. “Footage covering any potential water access points, that is, to identify attempts at intentional contamination, can also be monitored. The system can be programmed to prioritize data from water quality detection systems and trigger workflows to guide operators through required response protocols such as area shutdowns.”

Airport

According to the paper, data from baggage X-ray scanners, integrated with surveillance and communications systems, ensures that a live alert is prioritized on security control room video wall monitors in the event of an issue being logged by personnel in the screening area. “The control room team can then view the same X-ray footage as the baggage scanning crew, while nearby surveillance cameras monitor wider activity automatically,” it said.

The paper concluded by saying understanding customer needs and working with partners are key to implementing integrated security for infrastructure. “Command and control solutions can be configured to deliver integrations and workflows that meet exacting requirements, but tailoring to that level requires a thorough understanding of needs,” it said. “Technology is only part of the equation. Understanding the needs of the customer and developing partnerships with industry leaders will enable the intelligent integrations that can truly revolutionize the way critical infrastructure protection professionals work.”

  • Source: William Pao, a&s International Date: 2019/02/06 R

What are some high-growth verticals in EMEA, APAC?

Security is a growing market in EMEA and APAC as end users deal with various security issues in the region. In EMEA, some of the top verticals include government, retail and banking. Hospitality, meanwhile, is cited as a major revenue generator for Asian SIs given regional efforts to develop tourism.

Middle East

For the Middle East, the government sector also represents a major source of income due to the need to make offices and agencies secure against security risks. “Users in this sector purchase security to secure access to premises, control access limitation per user and time and monitor the access events,” said Ahmed Matari, Head of Operation and Maintenance at Kuwait-based Ideal Information.

Ahmed Matari, Head, Operation and Maintenance, Ideal Information

“We operate in Lebanon (HQ), Iraq and Nigeria. Terrorist threats drive the security needs for governments in those territories. This pushes us to deliver solutions to the highest standards with high reliability that can be counted on to mitigate any threat,” said Ziad Monla, CEO of Guardia Systems, which had a city surveillance project in Beirut. “We have implemented a turnkey city surveillance project in a record time of one year consisting of 2,000 cameras covering 350 locations, 200 license plate recognition cameras, fiber infrastructure, two data centers with one of them modular and mobile, two 50-operator control rooms packed with the latest technologies.”

Retail, meanwhile, has been cited as another important vertical market where loss prevention is being emphasized. “Retailers need security to prevent loss and crimes by activating alarm events,” Matari said. “We provide IP surveillance, access control systems and intrusion detection systems to help them avoid problems and losses.”

Banking is also a major vertical, with users increasingly looking for integrated, command center solutions. “Banks have a need to monitor all their branches from a central location. They need to be able to live view and playback cameras, control physical access, monitor intrusion and fire alarm systems all from one location,” said Monla, whose company has a project with Al Rafidain Bank in Iraq. “We are currently implementing an Oracle Core Banking solution that will enable the bank to shift to the new era of digital banking.”

Ziad Monla, CEO, Guardia Systems

According to the SIs, continued growth is expected in the Middle East due to ongoing security needs. “We expect the same revenue in 2018 compared to 2017, but we expect growth in 2019 as we are introducing new services and solutions,” Monla said.

Europe

For Europe, security remains a top priority amid incidents such as the truck attack in Nice in 2016 and the London Bridge attack in 2017. This then spawns the needs for security solutions. “Demand is driven largely by reaction. Something happens, CCTV is a solution. This is not always the right time to procure CCTV or security services, but it remains the

Kevin Bowyer, Technical director, NW security Group

e main point at which organizations contact us,” said Kevin Bowyer, Technical director of U.K.-based NW security Group.

Yet more and more, end users are using security for non-security applications to increase business intelligence, improve efficiency and enhance the customer experience, Bowyer said.

He listed the following verticals – logistics and transport, leisure and tourism, and manufacturing – as examples. “Typically, our work in these sectors comes about through ongoing operational change and expansion within the organizations that we work with. A good system not only pays for itself quickly, but paves the way for improved performance and efficiencies that our customers like to embrace and implement,” he said. “We deliver solutions that … make a real difference not only to their security, but to their business.”

According to him, with security becoming more commoditized, solutions that help drive the user’s business intelligence will be a key growth driver. “We expect growth in 2019, driven by technology advancements that increasingly deliver real security and business intelligence benefits to customers, whilst pricing of these technologies is becoming more commercially realistic,” Bowyer said.

Meanwhile, GDPR, which calls for more stringent handling of personal data, is already in effect and is expected to impact end users as they handle security. As such, SIs are working together with end users to ensure that their security systems are GDPR-compliant. “The introduction of GDPR earlier in the year will lead to higher standards in the industry, something we strongly advocate,” Bowyer said. “We ensure GDPR compliance within the system delivered over the long term.”

APAC

Sovan Hok, Technical Director, NKTech

The Asia Pacific is a growth market, with economies in the region expected to achieve GDP growth of anywhere between 4.1 and 6.9 percent this year, according to World Bank forecasts. This will leave end users with more money to spend on security, which is highly demanded given the threat landscape of the region.

“Growth this year will be higher compared to 2017, as demand is increasing. Hopefully, 2019 will see growth as well because security is essential this time,” said Vincent San Diego, VP of HYE Enterprises, a Philippines-based systems integrator.

Security is also driven by government regulations. The No CCTV No Permit rule in the Philippines, for example, calls for installation of video surveillance as a prerequisite for business permit application or renewal. In many APAC countries, new buildings are required to install fire safety systems that meet a certain standard. “To be regulation compliant is definitely a key need that that prompts users to spend on security,” said Sovan Hok, Technical Director at NKTech, a Cambodia-based systems integrator.

Hospitality is cited as a major revenue generator for SIs given regional efforts to develop tourism. According to the World Travel and Tourism Council, travel and tourism investment in Southeast Asia in 2017 was US$48.8 billion, or 6.4 percent of total investment, and the figure is expected to reach $86.8 billion by 2028. Against this backdrop, more and more hotels and casinos are being built, triggering security needs.

Vincent San Diego, VP, HYE Enterprises

Hok cites hotels and casinos as a major vertical market for them. “The needs of end users in those sectors include surveillance of people activities, proof recording and safety. We offer video surveillance system, access control, light automation and car parking systems to suit their needs,” he said.

Commercial buildings are another strong vertical. Specifically, a construction boom in the APAC region is further driving growth in this sector. “Fast growth of construction is definitely seen in our country,” Hok said. “We expect revenue to be higher this year than 2017, due to the rapidly grow of construction industry with foreign investors.”

 

Source: William Pao, a&s International Date: 2018/11/14 Related tags: EMEA, APAC
https://www.asmag.com/showpost/27368.aspx?name=news

 

What to expect of video and analytics in 2019?

With 2018 almost over, people are watching what technologies will be trending in security next year. As far as video surveillance is concerned, video content analysis, facial recognition and edge computing are expected to stand out in 2019.

That was according to BriefCam, which offered its predictions on video surveillance and analytics for 2019. Their points are summarized as follows.

Video content analysis

Video content analysis has evolved from over-promised technologies of the past to major innovations that enhance security as well as business intelligence, and their role in security will only become more significant in 2019.

“Video content analytics software that incorporates artificial intelligence (AI) and deep learning technology is now valuable for much more than after the fact investigations. Because of the incredibly fast speed and intelligent capabilities, many are finding new ways to use it,” said Trevor Matz, CEO of BriefCam. “Examples include Retail businesses leveraging it for proactive and strategic planning to create a better shopper experience that results in greater sales and loyalty; Healthcare organizations using it to address operational issues such as finding unauthorized people in restricted facility areas; and transportation hubs improving passenger flow and municipalities proactively keeping city streets safer.”

While it’s being suggested that today’s analytics lack a predictive element – they can’t really predict that someone is going to do something bad – advances in analytics do contribute to better crime prevention. “For example, through the use of big, data law enforcement agencies can better analyze crime patterns and trends to ‘forecast’ where security events will take place, and staff accordingly. The use of video analytics in post event investigations is critical for finding perpetrators, better understanding crime scenes and locating missing persons, and this data unlocks the intelligence needed to proactively deter crime,” said Stephanie Weagle, CMO of BriefCam.

Facial recognition

According to Matz, facial recognition is a big development that is here to stay. “Made possible by deep learning and AI technology, facial recognition can log you into your smart phone and identify your friends in your social media photos. And, as we think of video content analysis, facial recognition is playing an increasingly significant role,” he said. “In 2019 we’ll see more law enforcement organizations using video analytics with facial recognition to solve incidents much faster and retailers immediately identify shoplifters. As it proliferates throughout our world, and the technology becomes more readily available, we expect significant adoption in 2019.”

While there are certain concerns or ethical issues surrounding facial recognition, they will be ways to properly address them, Weagle said.

“Face recognition introduces meaningful use cases, with face matching based on an image within a video or an external image provided to the system (as part of a watch list or as an individual image),” she said. “The public has seen one too many ‘Minority Report’ type references to face recognition, and the reality is that there is no image enhancement, no connection to any personal data, and no relevance to any other images of the person anywhere outside of the video in which the face is matched. That said, we will likely see stronger government oversight to proactively develop policies to regulate the use of these technologies and to define the rights of opting out of being tracked digitally.”

Edge processing and cloud computing

Finally, edge processing and cloud computing will be playing a bigger role in accelerating the adoption of advanced video content analytics. “As video continues to gain popularity, the need to conserve bandwidth is driving a surge in cloud migration and edge computing. This opens up the possibility for advanced video content analytics that process data collected from cameras and devices,” Matz said. “In 2019, we anticipate a continued migration to cloud computing and edge processing and as a result, we’ll see AI-backed video content analytics become much more widely adopted in many industries such as transportation, higher education, healthcare, retail and more.”

 

Source: William Pao, a&s International Date: 2018/12/13 Related tags: Video analytics, video content analysis
https://www.asmag.com/showpost/27532.aspx?name=news

การเลือกใส่ขนาดความจุฮาร์ดดิสก์ในเครื่องบันทึก

Harddisk CCTV

การเลือกฮาร์ดดิสก์และขนาดให้เหมาะสมกับระบบ CCTV Security

ระบบกล้องวงจรปิดตามบ้านนั้น ส่วนใหญ่จะเก็บข้อมูล ลงในหน่วยความจำ(ฮาร์ดดิสก์) ที่อยู่ในตัวเครื่องบันทึก หากฮาร์ดดิสก์เต็มก็จะวนทับเป็นงูกินหางไปเรื่อยๆวัตถุประสงค์ของการติดตั้งกล้องวงจรปิดก็เพื่อให้ได้หลักฐาน ดังนั้นวันนี้เราก็ต้องมาดูขนาดฮาร์ดดิสก์ที่เหมาะสมสำหรับกล้องวงจรปิดของเราก่อนว่าต้องใช้ฮาร์ดดิสก์ขนาดไหน

 

คำแนะนำสำหรับการใส่ฮาร์ดดิสก์ในเครื่องบันทึกที่กล้องความละเอียด 720P หรือ 1 ล้านพิกเซล
สำหรับระบบกล้องวงจรปิด HD 4 ช่องสัญญาณ ความละเอียดกล้อง 720P นั้น ฮาร์ดดิสก์ที่เหมาะสมอย่างต่ำคือ 1TB
สำหรับระบบกล้องวงจรปิด HD 8 ช่องสัญญาณ ความละเอียดกล้อง 720P นั้น ฮาร์ดดิสก์ที่เหมาะสมอย่างต่ำคือ 1-2TB
สำหรับระบบกล้องวงจรปิด HD 16 ช่องสัญญาณ ความละเอียดกล้อง 720P นั้น ฮาร์ดดิสก์ที่เหมาะสมอย่างต่ำคือ 2TB ขึ้นไป

คำแนะนำสำหรับการใส่ฮาร์ดดิสก์ในเครื่องบันทึกที่กล้องความละเอียด 1080P หรือ 2 ล้านพิกเซล
สำหรับระบบกล้องวงจรปิด HD 4 ช่องสัญญาณ ความละเอียดกล้อง 1080P นั้น ฮาร์ดดิสก์ที่เหมาะสมอย่างต่ำคือ 1-2TB
สำหรับระบบกล้องวงจรปิด HD 8 ช่องสัญญาณ ความละเอียดกล้อง 1080P นั้น ฮาร์ดดิสก์ที่เหมาะสมอย่างต่ำคือ 2-4TB
สำหรับระบบกล้องวงจรปิด HD 16 ช่องสัญญาณ ความละเอียดกล้อง 1080P นั้น ฮาร์ดดิสก์ที่เหมาะสมอย่างต่ำคือ 3-4TB ขึ้นไป

นอกจากการใส่ฮาร์ดดิสก์ความจุมากๆ เพื่อเพิ่มจำนวนวันในการบันทึกแล้ว การปรับ Frame Rate ให้ลดลงก็เป็นอีกทางหนึ่งที่จะช่วยเพิ่มจำนวนวันในการบันทึกให้นานขึ้น สำหรับค่า Frame Rate ที่ปรับนั้นแนะนำให้ลดลงมาไม่เกิน 12fps (Frame Per Secound) ยกตัวอย่างก่อนปรับ Frame Rate อยู่ที่ 25Fps เมื่อปรับมาที่ 12Fps จะทำให้บันทึกได้จำนวนวันที่มากกว่าเดิมถึง 2 เท่า

สำหรับการคำนวณจำนวนวันของฮาร์ดดิสก์นั้นเราสามารถคำนวณได้จากโปรแกรม ที่นี่

เมื่อเราทราบแล้วว่าระบบกล้องวงจรปิดของเราสามารถบันทึกได้นานกี่วัน จะทำให้เราวางแผนในการสำรองไฟล์ออกมาได้ทันก่อนที่ไฟล์ที่บันทึกอยู่จะโดนการวนทับ และนำส่งไฟล์ให้กับเจ้าหน้าที่ตำรวจเพื่อทำการสืบสวนต่อไป

เทคโนโลยีการบีบอัดข้อมูลระบบใหม่ H.265+

H.265

การบีบอัดข้อมูลด้วย เทคโนโลยี H.265+

เชื่อว่าหลายคนคงได้อ่านและรู้จักกับระบบการบีบอัดข้อมูลที่เรียกว่า H.264 กันแล้วนะครับ การบีบอัดจะช่วยลดขนาดของข้อมูลให้เล็กลงและจัดเก็บไปในฮาร์ดดิสก์ แต่! ปัจจุบันนี้มาถึงยุคของ H.265+ กันแล้ว!! อันเนื่องมาจากเทคโนโลยีกล้องวงจรปิดปัจจุบัน พื้นฐานความคมชัดก็ระดับ HD กันทั้งนั้น เริ่มกันตั้งแต่ 720P ไปจนถึง 4 ล้านพิกเซล ถ้ายังใช้ H.264 แบบเดิมถึงจะบีบไฟล์ให้เล็กลงก็ตามเห็นทีเนื้อที่ฮาร์ดดิส์ความจุต่ำๆ จะไม่เพียงพอสำหรับกล้องที่ความละเอียด HD ก็เลยเกิดเทคโนโลยีการบีบอัดเทคโนโลยีใหม่ขึ้นมารองรับ

เทคโนโลยีใหม่ที่มาแทน H.264 คือ H.264+, H.265+, H.265 เป็นระบบการบีบอัดใหม่ล่าสุดที่จะมาช่วยให้เราสามารถเก็บข้อมูลที่ได้ไฟล์เล็กลง แต่ความคมชัดยังเหมือนเดิม และแน่นอนเมื่อได้ไฟล์ที่เล็กลงก็ใช้ขนาดฮาร์ดดิสก์ที่น้อยลงด้วยทำให้การบันทึกภาพได้จำนวนวันที่เพิ่มมากขึ้น ไม่เพียงแค่ขนาดไฟล์แค่เพียงอย่างเดียวเท่านั้นที่เล็กลง แบนด์วิธที่ใช้ในการเรียกข้อมูลก็ลดลงไปด้วย ยกตัวอย่างให้เห็นภาพกันดีกว่า เปรียบเทียบระบบเก่า H.264 Harddisk 2TB ที่เคยบันทึกได้ 11 วัน หากใช้เทคโนโลยีเครื่องบันทึก H.264+ หรือ H.265+ จะสามารถเพิ่มการบันทึกได้ถึง 20-30 วันเลยทีเดียว

สนใจเทคโนโลยีใหม่ล่าสุดสามารถติดต่อสอบถามข้อมูลเพิ่มเติมหรือสั่งซื้อได้ที่ตัวแทนจำหน่าย
ทั่วประเทศใกล้บ้านท่าน หรือสอบถามข้อมูลเพิ่มเติมกันได้ที่ Line@ :@peoplefu

Tel. 02-599-9999 “พีเพิล ฟู ชัดกลางวัน ยันกลางคืน”

#peoplefu
#กล้องวงจรปิด พีเพิลฟู
#พีเพิล ฟู H.265+
#พีเพิล ฟู H.264+